Free shipping Australia-wide on orders over $100 · Ships from Sydney

Auto Sunshades
MITSUBISHI LANCER 2000-2003 custom-fit magnetic car window sun shades

MITSUBISHI LANCER 2000-2003 Car Window Shades

4.4· 18 reviews
$99.99

+ $15.00 shipping

In stock — dispatched next business day from Sydney.

Guaranteed to fit your MITSUBISHI LANCER 2000-2003 — or we'll replace it or refund you. Cut to this exact make, model and year range. If it doesn't fit, contact us within 30 days and we'll replace the set or refund you in full — we cover the return shipping. Returns policy

This set includes front-door panels — parked use only. Australian road rules don't allow shades on the front driver or passenger windows while you're driving. Fit them when the car is parked, and take them off before you drive. Rear-door and third-row panels are fine to leave on.

1
Not sure this fits your car? Check on WhatsApp
Free shipping
Over $100 AUD
Ships from Australia
In stock · ships next business day
Easy 30-day returns
Free if faulty
Secure checkout
Encrypted by Stripe
VisaVISAMastercardAmerican ExpressAMEXApple PayPayGoogle PayGPayPayPalPayPal
Secure checkout powered by Stripe.
Share

Cut to this generation's pattern

These match the manufacturer's pattern for this generation's glass.

This vehicle’s shades fit with a rubber mount rather than magnets.

Not sure which set covers your year? Read the full fitment guide for this model.

About these MITSUBISHI LANCER 2000-2003 sun shades

Sedan, so the set is the four door windows and nothing else. No quarter panes, no rear glass.

Mitsubishi Lancer sedan shown with the pair of mesh door window shade panels

These were measured on an actual Lancer of this shape, cut, put back on the car and adjusted until they sat flat against the frame with no gap down the edge. On a car this old that matters more, not less — the pattern comes off a real example rather than a drawing.

The mesh is black polyester. It takes the glare and a good deal of the heat out without blacking the car out; from the driver's seat you can see through it fine, and it's harder to see in from the footpath. On and off in seconds. They'll stay put with the window wound down if you want the air moving, and they keep the dust and the insects out while you're at it. Take them off before highway speeds.

Front doors (2 pcs) $49.99 · Rear doors (2 pcs) $59.99 · Front & rear (4 pcs) $99.99

Custom-measured on your exact car — Every shade is measured directly on each individual vehicle, then produced at the workshop, fitted to the car, and fine-tuned until it meets standard. Only the finished, fitted car is photographed before the product goes to market — so every product is precise, thanks to a closed-loop, specialised process.

A genuine, gap-free fit — Exact dimensions mean the shades sit flush: clean-looking, with no gaps or warping and no damage to the door seals. Rear-door shades cover the whole door, while front-door shades are cut to leave just enough room to see your mirror, watch the road, and reach toll and parking cards.

100% black polyester mesh — The mesh blocks UV rays and cuts glare and cabin heat. Already have window film? Add these shades and you're set. No film yet? The shades alone are highly effective — there's no need to film your side windows (film the windscreen if you'd like).

Fast on, fast off — Fitting and removing the shades is quick and simple. Even with the window down, the shade still blocks sun, dust, and insects. Best of all, from inside you can see out clearly, while from outside it is harder to see in.

Shades hold securely in normal driving — we recommend removing them at highway speeds.

Build quality

Round 304 stainless, not flat steel

Most shades are framed with flat steel wire. It corrodes, and its edge works through the mesh at the fold. Ours is round-profile 304 stainless — it doesn't rust, and it doesn't cut the fabric it sits in.

Six close-ups comparing frames. Standard flat steel: a thin flat wire, prone to rust, shown corroded and having torn through the mesh. Our round steel frame: a polished round 304 stainless tube that won't rust and won't tear the mesh.
Scroll to compare all six →
Two shade panels side by side. The one on the left has faded to a patchy grey; ours on the right is still deep black, with a bound edge and a branded tab.
Left: mesh that has faded and gone patchy. Right: ours.
A fitted rear-door window shade seen from inside the car. The street, parked cars and shopfronts outside are clearly visible through the mesh.

Visibility

See out, without being seen

The mesh is open enough to see through from inside and dense enough to keep the cabin private from outside. Windows still wind down, and air still moves through.

Specifications

Product specifications

  • Package Includes

    2–4 custom-fit panels, installation guide, storage pouch

  • Fitment

    Precision-cut for the MITSUBISHI LANCER 2000-2003

  • Material

    Breathable mesh on a round 304 stainless frame with a rubber-mount edge

  • Installation

    Tool-free, rubber-mount attachment (about 2 minutes)

  • Compatibility

    Works with all trim levels, windows operate normally

Safe use: for rear passenger windows only. Do not fit shades to the windscreen or the front driver and passenger windows while driving, and make sure they never block the driver's view.

Installation

How to fit them

A quick demo of the magnetic snap-fit — it works the same way on every vehicle.

Watch the install

How to install magnetic sun shades

About two minutes, start to finish.

Installation guide7 steps
Step-by-step installation guide for Auto Sunshades custom-fit magnetic car window shades
View full guide

How it's made

Made for your exact car — here's how

Not universal. Every shade is measured, cut and fitted to your specific make, model and year.

  1. AR measuring app tracing a car window outline to exact dimensions

    Step 01Measure

    Measured to the millimetre

    We trace your exact window with our AR app — no universal-fit gaps.

  2. CNC machine precision-cutting a window pattern

    Step 02Cut

    CNC-cut & test-fitted

    Every window shape is precision-cut and fit-checked before production.

  3. A custom-fit magnetic mesh sun shade fitted to a car window

    Step 03Craft

    Crafted for your car

    Made to that exact pattern — magnetic mesh, fitted in seconds, no tools.

  4. A packed order at an Australia Post counter

    Step 04Ship

    Dispatched from Australia

    Packed and sent via Australia Post — tracked to your door.

Comparison

MITSUBISHI LANCER 2000-2003 vs generic shades

Where a made-to-measure set pulls ahead of a universal one.

FeatureMITSUBISHI LANCER 2000-2003 Custom-FitGeneric Suction-Cup
FitPerfect custom fitGeneric size, gaps
AirflowMesh design allows airflowOften blocks airflow
Window OperationWindows work normallyMay interfere
LookClean, professionalBulky appearance
DurabilityFree 30-day return if faultyLimited warranty
5 key advantages with MITSUBISHI LANCER 2000-2003 Custom-Fit

Reviews

What customers say

4.4
18 reviews
5
11
4
4
3
3
2
1
Quan L.

Shades are fine, do the job and fit okay. Had to wait over two weeks for delivery with barely any updates. Ended up arriving the day before we needed them which was cutting it fine. The product doesn't deserve the low rating but the wait was frustrating.

Aisha V.

No drama with these at all. Slap em on and you're done. Keeps the back seat bearable for the dog when I have to leave him in the car for 5 mins at the shops. Would get another set if I had another car.

Sophie W.

These are good. Proper magnets not the weak ones you sometimes get. Fit is fine on all four windows, took a bit of fiddling on the rear to get them sitting flat but once on they stayed. Car is way cooler, sun doesn't blast through anymore.

Daniel S.

Good shades, well made. Postage was a little slow, took about 8 days to Melbourne. Not the end of the world but if you're in a hurry maybe factor that in. Product itself I've got no complaints about.

Nora O.

Bought these for a road trip down the coast. Kids didn't complain once about the sun which is a minor miracle. They're thin enough to see through for reversing but thick enough to actually block the heat. Left them on since we got back, still sitting tight.

Showing 1-5 of 18 reviews

FAQ

Common questions

Does it fit all trim levels?

Fitment is model-year specific. Use the selector to confirm.

Is installation permanent?

No, shades can be removed at any time without tools.