
TOYOTA
Made to orderTOYOTA CAMRY 1987-1992 Car Window Shades
+ $15.00 shipping
Made to order — cut and fitted for your car, ready to ship in 1–3 weeks.
This set includes front-door panels — parked use only. Australian road rules don't allow shades on the front driver or passenger windows while you're driving. Fit them when the car is parked, and take them off before you drive. Rear-door and third-row panels are fine to leave on.
Cut to this generation's pattern
These match the manufacturer's pattern for this generation's glass.
This vehicle’s shades fit with a rubber mount rather than magnets.
Not sure which set covers your year? Read the full fitment guide for this model.
About these TOYOTA CAMRY 1987-1992 sun shades
Keeping a classic comfortable, Toyota Camry (1987–1992) sun shades fit this much-loved sedan's door windows to cut cabin heat and shield ageing trim, dash, and upholstery from further sun damage — as useful now as when the car was new.
Three sets are available: front doors, rear doors, or all four windows in one kit. The rear pair looks after passengers and parked-car protection; the full set covers the cabin end to end. These are shaped for the 1987–1992 generation's glass — other Camry year ranges are listed separately.
☑ Custom-measured on your exact car — Every shade is measured directly on each individual vehicle, then produced at the workshop, fitted to the car, and fine-tuned until it meets standard. Only the finished, fitted car is photographed before the product goes to market — so every product is precise, thanks to a closed-loop, specialised process.
☑ A genuine, gap-free fit — Exact dimensions mean the shades sit flush: clean-looking, with no gaps or warping and no damage to the door seals. Rear-door shades cover the whole door, while front-door shades are cut to leave just enough room to see your mirror, watch the road, and reach toll and parking cards.
☑ 100% black polyester mesh — The mesh blocks UV rays and cuts glare and cabin heat. Already have window film? Add these shades and you're set. No film yet? The shades alone are highly effective — there's no need to film your side windows (film the windscreen if you'd like).
☑ Fast on, fast off — Fitting and removing the shades is quick and simple. Even with the window down, the shade still blocks sun, dust, and insects. Best of all, from inside you can see out clearly, while from outside it is harder to see in.
Shades hold securely in normal driving — we recommend removing them at highway speeds.
Build quality
Round 304 stainless, not flat steel
Most shades are framed with flat steel wire. It corrodes, and its edge works through the mesh at the fold. Ours is round-profile 304 stainless — it doesn't rust, and it doesn't cut the fabric it sits in.



Visibility
See out, without being seen
The mesh is open enough to see through from inside and dense enough to keep the cabin private from outside. Windows still wind down, and air still moves through.
Specifications
Product specifications
- Package Includes
2–4 custom-fit panels, installation guide, storage pouch
- Fitment
Precision-cut for the TOYOTA CAMRY 1987-1992
- Material
Breathable mesh on a round 304 stainless frame with a rubber-mount edge
- Installation
Tool-free, rubber-mount attachment (about 2 minutes)
- Compatibility
Works with all trim levels, windows operate normally
Safe use: for rear passenger windows only. Do not fit shades to the windscreen or the front driver and passenger windows while driving, and make sure they never block the driver's view.
Installation
How to fit them
A quick demo of the magnetic snap-fit — it works the same way on every vehicle.
Watch the install

About two minutes, start to finish.

How it's made
Made for your exact car — here's how
Not universal. Every shade is measured, cut and fitted to your specific make, model and year.

Step 01 — Measure
Measured to the millimetre
We trace your exact window with our AR app — no universal-fit gaps.

Step 02 — Cut
CNC-cut & test-fitted
Every window shape is precision-cut and fit-checked before production.

Step 03 — Craft
Crafted for your car
Made to that exact pattern — magnetic mesh, fitted in seconds, no tools.

Step 04 — Ship
Dispatched from Australia
Packed and sent via Australia Post — tracked to your door.
Comparison
TOYOTA CAMRY 1987-1992 vs generic shades
Where a made-to-measure set pulls ahead of a universal one.
| Feature | TOYOTA CAMRY 1987-1992 Custom-Fit | Generic Suction-Cup |
|---|---|---|
| Fit | Perfect custom fit | Generic size, gaps |
| Airflow | Mesh design allows airflow | Often blocks airflow |
| Window Operation | Windows work normally | May interfere |
| Look | Clean, professional | Bulky appearance |
| Durability | Free 30-day return if faulty | Limited warranty |
Reviews
What customers say
No reviews yet — be the first to review this fit.
FAQ
Common questions
Does it fit all trim levels?
Fitment is model-year specific. Use the selector to confirm.
Is installation permanent?
No, shades can be removed at any time without tools.